Synergy EnviroSeal Gray Sealer - 4x1Gal/Cs
Introducing EnviroSeal™Gray, one of the newest additions to our Synergy PRO line. This urethane and acrylic polymer blended product locks-in/locks-out like not other product, with variable viscosity and tremendous coverage. It may be wiped on, sprayed on, spread on or mopped on with coverage rates from 600-1800 sf/gal depending of a variety of factors.
PRIMARY APPLICATIONS:
Sealing Walls & Trim Against Mold & Odor Recurrence
Think of this product as a base-sealer for OdorProTec or SilverShield for when surfaces are too porous for a single application. If applying with roller, pad or microfiber, use straight. If applying with an airless sprayer, reduce with water (not more than 1:1) to achieve a consistent spray and good coverage.
Sealing Timbers, Boarding Boards and Plywood in Attics & Crawl Spaces
Please use equipment with sufficient power so that this product need not be reduced while spraying overhead. Apply with successive thin applications directly over top of the prior with little set time. Do not attempt to apply in a single application. Product should quickly go from white to clear when applied properly.
Sealing VCT, Concrete or Ceramic Tile with Grout
Use as supplied and apply with a microfiber finish mop. Apply thin coats and not more than two coats before covering with EnviroBuild Floor Finish.
Vinyl Composite Tile & Bare Wood Floors
EnviroSeal™ Gray provides the perfect answer for sealing freshly cleaned walls and trim after a mold, mildew or smoke & odor remediation treatment, especially when the substrate is rough or porous like construction grade timbers or plywood. Depending on your available equipment ,EnviroSeal™Gray can be applied at full-strength or reduced by not more than 1:1 with clear water. This opens up the possibility for application with airless or air-powered spraying, wiping, brushing or application to floors with microfiber.
