Everything Needed for Removing Soot or Organic Soils from Walls
This Starter Kit includes everything you'll need to effectively remove soot or other soils from walls and ceilings:
- (1) 3 gallon seal-able Storage/Charging Bucket
- (5) 10" Looped Microfiber heads to attach to our...
- (1) 10" Velcro Mop-Holder Frame
- (1) Synergy Foaming Pump Sprayer
- (1) 2L Bottle of Synergy Soil Break
- (1) Pouch of (24) 4g Envirotab Tablets
- (1) Telescoping Handle to fit the Mop Frame
Steps for Setting Up:
- Fill the Pump Foaming Sprayer with 1 Liter of warm water, adding to it (1) 4g tablet. Cover with cap until tablet is dissolved. After 3 minutes, add to this (1) oz of Synergy Soil Break, apply cap and pump to pressurize.
- Remove contents from the storage/charging bucket and lay a mop cover down, looped fibers down. Moisten each mophead with contents of pump sprayer. Add another and repeat. Do the same for the remaining (3) mop heads.
- Lay out plastic on the floor to protect floor substrate. Add whatever medium possible on top of this, along the wall-edge, to capture run-off liquid.
- Attach the Telescoping Handle to the Frame.
- Use the Pump Foaming Sprayer to pre-soak a section of wall.
- Attach a mophead to the frame and agitate the surface area, recovery the soil from the wall. Soil should come off easily.
- Rinse soiled mopheads under water and repeat scrubbing action with dampened head with just clear water.
- When all (5) heads are soiled, rinsed and ready, repeat the pre-charging steps.
- When cleaning is complete, empty the remaining contents of the pump sprayer, rinse and store with cap off or loose.
